Recently on Cyclingnews.com |
 Mont Ventoux Photo ©: Sirotti |
Eurobike show
Germany, August 30-September 2, 2007
Main Page Previous Part Next Part
Part 8 - Things that go 'round and 'round
By James Huang
Rotor applies new DTT concept to line of components
|
Rotor hit the big time with its elliptical Q-Rings, but some of the technology found in the Ágilis crankset that it launched last year has spawned a whole new line of components from the Spanish company. The Ágilis uses a unique headless bolt with a dual-thread pitch to attach the arms to the large-diameter aluminum spindle. The concept eliminates the need for a conventional bolt head, as well as the additional material on the component itself against which the head would normally rest. According to Rotor, this Double Thread Technology (DTT) reduces weight, increases component rigidity, improves reliability, and even increases clamping torque.
Rotor is using DTT to firmly establish itself as a legitimate player in the ultra-lightweight component market for 2008. According to Rotor, DTT affords a 25% weight reduction in its new S1 stem, which weighs just 99g for a 90mm length while still managing to pass the stringent EFBe fatigue certification. In spite of its feathery weight, Rotor says the S1 is suitable for both road and off-road use, and carries no rider weight limitation.
DTT also finds its way on to a new pair of 56g aluminum MTB bar ends, as well as a line of decidedly minimalist seatpost collars. A DTT-equipped seatpost is also on the way.
Shimano carbon Dura-Ace crankset lighter and stiffer than all-aluminum model
|
Shimano has long held the position that it would only utilize carbon fiber in situations that would yield a functional improvement over forged aluminum. Well, that day has come with the new Dura-Ace FC-7800C crankset, which we first spotted back at the Tour de Suisse in June and now formally introduced at this year's Eurobike show.
The new crankset uses an aluminum core and carbon fiber skin, yielding a fully hollow structure (the spider, too, in this case) that weighs just 709g while also achieving a 10% increase in stiffness relative to the standard version. FC-7800C continues to utilize Shimano's external bearing bottom bracket but borrows the modified non-driveside arm attachment method from XTR. Shimano will offer FC-7800C in 170, 172.5, and 175mm arm lengths.
Maxxis goes cross-country for 2008
|
Maxxis is apparently concentrating on the lighter-weight end of the spectrum with a pair of new road tires and a round of cross-country treads for 2008. The new Cormet road racing clincher places a single 62a-durometer compound atop a new 120tpi casing, while an as-yet unnamed 'uphill only' model pushes the weight envelope for hill climb events.
The new Monorail sports a relatively short and tightly-spaced central tread pattern for fast rolling performance, more widely-spaced transition knobs, and aggressive shoulder knobs for predictable cornering. Maxxis will only offer 26x2.10" casing sizes in both tube-type and tubeless models, but the top-end tube-type version is said to weigh just 480g.
The Ridgeline is a hardpack-specific tread with tightly-spaced and aggressively ramped knobs throughout. As with the Monorail, Maxxis will limit offerings to 26x2.10" sizes, but the top-end eXCeption tube-type version is similarly lightweight at just 490g.
Maxxis says its new Ardent is decidedly more versatile with a tread pattern lying somewhere in between its existing Minion and Highroller models. As is typical for Maxxis these days, the central knobs are heavily ramped to decrease rolling resistance, and heavily-reinforced side knobs suggest a firm hold on corners. Size offerings are similarly wide-ranging with casing widths ranging from 26x2.25" to 26x2.40" for cross-country versions, and from 26x2.40" to 26x2.60" for dual-ply DH models. Maxxis will also offer the Ardent in a single 29x2.25" model.
DT Swiss debuts first carbon wheel
|
The DT Swiss name has long been synonymous with wheels in one way or another, but heretofore its offerings had been limited primarily to aluminum. DT Swiss delves into carbon wheels for the first time in 2008 with its new premium RRC 1250 model, built with a mid-section all-carbon clincher rim and the company's 190 Ceramic hubs, all laced together using bladed-and-butted stainless steel spokes and alloy nipples.
DT Swiss claims a weight of just 1250g for the set (570g front, 680g rear), and will also include a pair of its ratcheting RWS Road Titan skewers, carbon-specific brake blocks, wheel bags, and rim tape.
On the off-road side of things, DT Swiss looks to have completely integrated its recent acquisition of Pace suspension products for the upcoming season. Not much has changed feature-wise, but all models wear a distinctive black, white, and red color scheme and hopefully more reliable internals to match the snazzy new look.
The renamed XRC air-sprung cross-country race fork weighs just 1380g (3.04lb) while offering up to 100mm of travel. Overall construction remains largely as it was under the Pace brand name, including carbon fiber lowers with magnesium dropouts and a hollow-forged aluminum crown. While still not equipped with any sort of platform valving (a good or a bad thing, depending on your outlook), the XRC is available with a remote lockout.
Among the most interesting models, however, is the EXC which somehow manages to deliver 150mm of travel in a package claimed to weigh just 1590g (3.5lb) complete with DT Swiss' 'Launch Control' lockdown feature. A 20mm thru-axle option adds just 100g while adding considerable front-end rigidity.
Michelin debuts Pro³ clincher line
|
This year's Eurobike show saw the official debut of Michelin's new Pro³ Race clincher road racing tire, whose new dual-compound tread is derived from the company's Moto GP division. According to Michelin, the new central tread delivers 20% more straight-line grip than the Pro² Race, while the new shoulder rubber offers a whopping 40% improvement. Michelin says the Moto GP compounds are also more readily deformable than before to help maintain grip on coarser pavement and reduce rolling resistance. For added security, the Pro³ Race casing gains a new High Density Puncture Protector (HDPP) nylon belt, yet total claimed weight is still highly competitive at just 200g for the 700x23c size.
Michelin will offer just the Pro³ Race for now, but the family will eventually include an even lighter Pro³ Light model as well as an even grippier Pro³ Grip. The Pro³ Race will be found on complete bikes beginning in October, but won't hit the aftermarket until March 2008.
Photography
For a thumbnail gallery of these images, click here
Images by Rotor
- Rotor's new S1 hits the scales at just 99g yet claims superb stiffness and strength as well.
Images by James Huang/Cyclingnews.com
- The S1 is built around Rotor's new Double Thread Technology . The dual thread pitch pulled parts together without the need for a conventional bolt head.
- These ultralight bar ends from Rotor are claimed to weigh just 28g each.
- Rotor is firming launching into the lightweight component category with these minimalist seat clamps.
- Naturally, parts will be available in anodized colors , although in Rotor's case choices look to be limited to black and red.
- The yet-to-be-release seat post also utilizes the DTT concept.
- Rotor expands its Q-Ring offerings with models to fit Shimano's newest XTR model…
- …as well as new road compact sizes.
- Rotor continues to supply Dutch 'cross powerhouse Marianne Vos with its Q-Rings.
- Vos even gets her own 53T size , which Rotor does not normally make available to the public (it say it has only produced twelve to date).
- Shimano's new Dura-Ace carbon crankset marks its first official foray into composite crankarms.
- The FC-7800C utilizes hollow carbon fiber arms but Shimano naturally has its own approach to the idea.
- A minimalist aluminum spider insert maintains perfect alignment.
- The new Maxxis Cormet boasts a single 62a compound wrapped over a new 120tpi casing.
- Uphill only? Maxxis' new as-yet-unnamed tire is so light that the company only endorses it for hill climb events.
- The new Monorail sports a fast-rolling center tread with sure-cornering side knobs.
- The Ridgeline is purpose-built for hardpack terrain.
- The new Ardent is a more versatile tread said to bridge the gap between the Minion and Highroller.
- DT Swiss launches its first carbon-rimmed wheelset , the RRC 1250.
- The RRC 1250 includes a mid-section carbon clincher rim…
- …supposedly made in Switzerland.
- DT Swiss acquired the Pace brand of forks and looks to have nearly completely integrated the line for 2008.
- The XRC fork offers 100mm of travel yet is just 1380g (3.04lb).
- DT Swiss' line of rear shocks carries on for 2008 with a wealth of sizes to fit most bikes.
- The Michelin Pro³ Race supposedly offers 40% more cornering grip and 20% more straight-line traction than the Pro² Race.
- A new Protek Max technology from Michelin promises to greatly increase flat resistance for its commuter and trekking tires.
- The Pilot inverted tread is intended for pavement (and looks like a fox).
- The Tracker tread is designed for looser conditions (and looks like a swarm of angry bees!).
