The Truvativ XX crank shifts the chainline inboard
Photo ©: James Huang
|
|
The BB30 version of the Truvativ XX crank
Photo ©: James Huang
|
|
A small threaded collar allows for fine bearing adjustment
Photo ©: James Huang
|
|
Truvativ XX cranksets will be offered in four bottom bracket styles:
Photo ©: SRAM
|
|
The chainring bolts thread directly into the crankarm
Photo ©: James Huang
|
|
The star of the XX group is the new X-Dome cassette
Photo ©: James Huang
|
|
The aluminum back plate on the XX cassette
Photo ©: James Huang
|
|
The new X-Glide tooth profiles are substantially quieter than before
Photo ©: James Huang
|
|
Any issues with mud and debris packing up the cassette
Photo ©: SRAM
|
|
The carbon fiber pull lever is still adjustable for angle
Photo ©: James Huang
|
|
The rear derailleur is lighter than X.0
Photo ©: James Huang
|
|
The cable has been moved further inboard
Photo ©: James Huang
|
|
The XX derailleur is by far SRAM's lightest off-road model to date.
Photo ©: James Huang
|
|
Widely set pivots and alloy and titanium hardware
Photo ©: James Huang
|
|
High mount models use a stainless steel band clamp
Photo ©: James Huang
|
|
In addition to the usual front derailleur sizes,
Photo ©: SRAM
|
|
The Avid XX brake
Photo ©: James Huang
|
|
The new two-piece Avid XX caliper
Photo ©: James Huang
|
|
A new two-piece rotor uses a stainless steel brake track
Photo ©: James Huang
|
|
Reach adjustment on the Avid XX brakes
Photo ©: James Huang
|
|
The new XLoc design is not only light
Photo ©: James Huang
|
|
The new MatchMaker X clamps
Photo ©: James Huang
|
|
SRAM have adopted T25 Torx bolts for nearly everything
Photo ©: James Huang
|
|
RockShox will also add several XX-level forks
Photo ©: James Huang
|
|
The top-end SID XX World Cup
Photo ©: James Huang
|
|
The hydraulic XLoc fitting atop the fork
Photo ©: James Huang
|
|
Our test bike for the launch
Photo ©: James Huang
|
|