Form & Fitness Q & A
Got a question about fitness, training, recovery from injury or a related subject?
Drop us a line at fitness@cyclingnews.com.
Please include as much information about yourself as possible, including your
age, sex, and type of racing or riding. Due to the volume of questions we receive,
we regret that we are unable to answer them all.
The Cyclingnews form & fitness panel
Carrie Cheadle, MA (www.carriecheadle.com)
is a Sports Psychology consultant who has dedicated her career to helping
athletes of all ages and abilities perform to their potential. Carrie
specialises in working with cyclists, in disciplines ranging from track
racing to mountain biking. She holds a bachelors degree in Psychology
from Sonoma State University as well as a masters degree in Sport Psychology
from John F. Kennedy University.
Jon Heidemann (www.peaktopeaktraining.com)
is a USAC Elite Certified cycling coach with a BA in Health Sciences from
the University of Wyoming. The 2001 Masters National Road Champion has
competed at the Elite level nationally and internationally for over 14
years. As co-owner of Peak to Peak Training Systems, Jon has helped athletes
of all ages earn over 84 podium medals at National & World Championship
events during the past 8 years.
Dave Palese (www.davepalese.com)
is a USA Cycling licensed coach and masters' class road racer with 16
years' race experience. He coaches racers and riders of all abilities
from his home in southern Maine, USA, where he lives with his wife Sheryl,
daughter Molly, and two cats, Miranda and Mu-Mu.
Kelby Bethards, MD received a Bachelor of
Science in Electrical Engineering from Iowa State University (1994) before
obtaining an M.D. from the University of Iowa College of Medicine in 2000.
Has been a racing cyclist 'on and off' for 20 years, and when time allows,
he races Cat 3 and 35+. He is a team physician for two local Ft Collins,
CO, teams, and currently works Family Practice in multiple settings: rural,
urgent care, inpatient and the like.
Fiona Lockhart (www.trainright.com)
is a USA Cycling Expert Coach, and holds certifications from USA Weightlifting
(Sports Performance Coach), the National Strength and Conditioning Association
(Certified Strength and Conditioning Coach), and the National Academy
for Sports Nutrition (Primary Sports Nutritionist). She is the Sports
Science Editor for Carmichael Training Systems, and has been working in
the strength and conditioning and endurance sports fields for over 10
years; she's also a competitive mountain biker.
Eddie Monnier (www.velo-fit.com)
is a USA Cycling certified Elite Coach and a Category II racer. He holds
undergraduate degrees in anthropology (with departmental honors) and philosophy
from Emory University and an MBA from The Wharton School of Business.
Eddie is a proponent of training with power. He coaches cyclists (track,
road and mountain bike) of all abilities and with wide ranging goals (with
and without power meters). He uses internet tools to coach riders from
any geography.
David Fleckenstein, MPT (www.physiopt.com)
is a physical therapist practicing in Boise, ID. His clients have included
World and U.S. champions, Olympic athletes and numerous professional athletes.
He received his B.S. in Biology/Genetics from Penn State and his Master's
degree in Physical Therapy from Emory University. He specializes in manual
medicine treatment and specific retraining of spine and joint stabilization
musculature. He is a former Cat I road racer and Expert mountain biker.
Since 1986 Steve Hogg (www.cyclefitcentre.com)
has owned and operated Pedal Pushers, a cycle shop specialising in rider
positioning and custom bicycles. In that time he has positioned riders
from all cycling disciplines and of all levels of ability with every concievable
cycling problem. Clients range from recreational riders and riders with
disabilities to World and National champions.
Current riders that Steve has positioned include Davitamon-Lotto's Nick
Gates, Discovery's Hayden Roulston, National Road Series champion, Jessica
Ridder and National and State Time Trial champion, Peter Milostic.
Pamela Hinton has a bachelor's degree in Molecular
Biology and a doctoral degree in Nutritional Sciences, both from the University
of Wisconsin-Madison. She did postdoctoral training at Cornell University
and is now an assistant professor of Nutritional Sciences at the University
of Missouri-Columbia where she studies the effects of iron deficiency
on adaptations to endurance training and the consequences of exercise-associated
changes in menstrual function on bone health.
Pam was an All-American in track while at the UW. She started cycling
competitively in 2003 and is the defending Missouri State Road Champion.
Pam writes a nutrition column for Giana Roberge's Team Speed Queen Newsletter.
Dario Fredrick (www.wholeathlete.com)
is an exercise physiologist and head coach for Whole Athlete™. He is a
former category 1 & semi-pro MTB racer. Dario holds a masters degree in
exercise science and a bachelors in sport psychology.
Scott Saifer (www.wenzelcoaching.com)
has a Masters Degree in exercise physiology and sports psychology and
has personally coached over 300 athletes of all levels in his 10 years
of coaching with Wenzel Coaching.
Kendra Wenzel (www.wenzelcoaching.com)
is a head coach with Wenzel Coaching with 17 years of racing and coaching
experience and is coauthor of the book Bike Racing 101.
Steve Owens (www.coloradopremiertraining.com)
is a USA Cycling certified coach, exercise physiologist and owner of Colorado
Premier Training. Steve has worked with both the United States Olympic
Committee and Guatemalan Olympic Committee as an Exercise Physiologist.
He holds a B.S. in Exercise & Sports Science and currently works with
multiple national champions, professionals and World Cup level cyclists.
Through his highly customized online training format, Steve and his handpicked
team of coaches at Colorado Premier Training work with cyclists and multisport
athletes around the world.
Richard Stern (www.cyclecoach.com)
is Head Coach of Richard Stern Training, a Level 3 Coach with the Association
of British Cycling Coaches, a Sports Scientist, and a writer. He has been
professionally coaching cyclists and triathletes since 1998 at all levels
from professional to recreational. He is a leading expert in coaching
with power output and all power meters. Richard has been a competitive
cyclist for 20 years
Andy Bloomer (www.cyclecoach.com)
is an Associate Coach and sport scientist with Richard Stern Training.
He is a member of the Association of British Cycling Coaches (ABCC) and
a member of the British Association of Sport and Exercise Sciences (BASES).
In his role as Exercise Physiologist at Staffordshire University Sports
Performance Centre, he has conducted physiological testing and offered
training and coaching advice to athletes from all sports for the past
4 years. Andy has been a competitive cyclist for many years.
Michael Smartt (www.wholeathlete.com)
is an Associate Coach with Whole Athlete. He holds a Masters degree
in exercise physiology, is a USA Cycling Level I (Elite) Coach and is
certified by the NSCA (Certified Strength and Conditioning Specialist).
Michael has more than 10 years competitive experience, primarily on the
road, but also in cross and mountain biking. He is currently focused on
coaching road cyclists from Jr. to elite levels, but also advises triathletes
and Paralympians. Michael is a strong advocate of training with power
and has over 5 years experience with the use and analysis of power meters.
Michael also spent the 2007 season as the Team Coach for the Value Act
Capital Women's Cycling Team.
Earl Zimmermann (www.wenzelcoaching.com)
has over 12 years of racing experience and is a USA Cycling Level II Coach.
He brings a wealth of personal competitive experience to his clients.
He coaches athletes from beginner to elite in various disciplines including
road and track cycling, running and triathlon.
Advice presented in Cyclingnews' fitness pages is provided for educational
purposes only and is not intended to be specific advice for individual
athletes. If you follow the educational information found on Cyclingnews,
you do so at your own risk. You should consult with your physician before
beginning any exercise program.
|
Fitness questions and answers for October 7, 2008
Change of training
Hip and pedal length
Mid-foot cleat adapters
Recovering from broken Ulna and Radius
Numb toes
Heel problems
Piriformis Syndrome and cycling
Shims
Change of training
I´m an 18-year-old rider and started cycling a year ago. I used to do mainly
cross-country skiing in winter and running in summer till my 16. A year ago,
my friend told me about mountain-bike orienteering and took part in a few MTB
orienteering races. I was chosen as a young guy in the national MTB-O team and
had to start to train on the road bike.
Finally, I love training on the road bike and nowadays I spend much of my training
time on it. What level of road cyclist can I reach? Is there any chance to reach
the level of guys who have been training hard and regularly since their childhood?
Is it too late for a rider who takes cycling seriously and who aims to perform
well?
Vojta Stránský
Czech Republic
Scott Saifer replies:
It takes 2-3 years for a rider who is new to good training to get close to
his or her potential as a cyclist. Starting to ride at 17 or 18, you can get
to be as strong and as good a racer as anyone who started younger, but you
have to accept that it will take 1-2 more years before you are at your best
while the riders who have been training already are close to their best already.
If you want to be a great bike racer, don't be discouraged if you are not
winning this year or next. You will catch up, and when some of the others
are burning out and losing interest after racing for many years, you'll be
reaching your peak just in time for U23 races and perhaps turning professional.
Hip and pedal length
I am a 65 year old 6'6", 185-pound male cyclist that has been battling bursitis
in my left hip for quite a while. I have finally got it partially solved with
spacers under my left Speedplay cleat and NAID pain killers. I have used 177.5mm
Dura Ace cranks for several years, but I am now thinking of going to 180's because
I feel that I am spinning in tight circles. At the same time I would like to
switch to a compact set up.
My two questions are: will this change in length affect my hip and who makes
compact cranks in either 177.5mm or 180mm length?
Gary Gibson
Steve Hogg replies:
Any negative effects on your hip by increasing crank length are likely to
occur because your knee rises too high at the top of the pedal stroke. To
test whether you are going to have a problem, drop your seat 5mm and ride
for a week or so. If you don't have problems with your hips at that seat height,
you're unlikely to have problems with the 180's. A set of 180mm cranks are
2.5 mm longer than your 177.5mm cranks, meaning that your seat post will have
to drop 2.5mm further into your frame to maintain the same seat height from
pedal axle to top of seat. That seat post drop of 2.5 mm plus the 2.5mm extra
crank length means that your knee will rise 5mm higher at the top of pedal
stroke.
Mid-foot cleat adapters
I've been following a lot of the crank/pedal length/position debates for a
long time, and now that I have six months until my next race I am taking the
opportunity to try out a lot of the ideas which I think hold merit. First and
foremost is mounting the cleats so that the spindle is behind the metatarsal.
I am aware of some adapters for Speedplay pedals that will give you such a rear-ward
mounting of cleats, but are there such systems for three-bolt pattern pedal
systems? I've briefly looked around the internet to no avail... is Speedplay
the only way to go if I want to give this a whirl?
Pete Custer
Alexandria, VA, USA
Steve Hogg replies:
You're right. Speedplay is your only option. The Speedplay part no. 13330
will allow cleat adjustment from 14mm further back to 5mm further forward
than the standard Speedplay baseplate. Bear in mind though that the standard
Speedplay baseplate has about 5mm less rearward adjustment than other three-bolt
systems. That means that you'll end up approximately 10mm further back than
is possible on whatever system you are using now. Don't confuse that with
midfoot cleat position though. That would require another 30-40mm more rearward
movement than is possible with part no. 13330.
Recovering from broken Ulna and Radius
My son, who is 15 this year, broke his ulna and radius during physical education
in school on September 16. That same day, he had surgery where a titanium wire
(or nailing, as the consultant called it) was inserted into both his ulna and
radius.
My son has been a very active cyclist both road and off-road and was preparing
for a special event in 2010 in Singapore. But we were heading for a selection
which is any time from now and the next 3-4 months. But it looks like that is
not going to happen and all that he has been preparing for the past year appears
to be very much gone.
What is your advice?
Dylan Tan
Scott Saifer replies:
My advice for anyone who is returning from injury is to take one day at a
time. What is the best thing that your son can do today for his cycling? Follow
the doctors' advice with regard to healing and rehabbing his arm. You didn't
mention when he is allowed to return to riding or whether he has been riding
already, nor how talented he is. With those bits of information plus the doctors'
advice, I'd give a more specific answer. If he routinely thrashes the competition,
the situation is quite different than if he needs a personal-best ride to
make the selection.
Carrie Cheadle replies:
It can be devastating when an injury keeps you from racing in an event that
you have spent months training for. Injury is an unfortunate aspect that sometimes
comes with the territory. I'm sure your son is disappointed that he will miss
out on this event. Scott has some great advice - your son has to keep himself
in the present and focus on what he can do right now for his cycling. Focusing
on what he can do versus on what he can't do or what he will miss out
on will help him feel like he has some sense of control.
Right now you son's cycling goals might have to take a back seat to his recovery
goals. Since this recovery means he will miss out on this event; have him
pick out another event in the future that he will be excited about training
for when he is fully recovered. Cycling might be on the back burner now, but
it won't be forever. And like Scott mentioned... if we have more information
we might be able to get a little more specific.
Numb toes
My wife frequently has numb toes while riding her road bike with SPD pedals.
She is riding a road bike with flat bars and recreational SPD pedals - the kind
with a flat platform on one side and SPD clip-ins on the other. She has Shimano
recreational mountain bike style shoes with laces and one velcro strap. The
problem is not weather-related and occurs even with her laces are completely
loose. Typically this occurs on longer rides (over one hour) and there seems
to be no rhyme or reason to it... however, she notices it occurs with thicker
socks more often. Even with thicker socks though she can still wiggle her toes
just fine and the shoes aren't too tight in general. It gets to the point where
we have to stop for her to take the shoes off and restore some blood flow. Any
thoughts?
Paul Hunnicutt
Boulder, CO, USA
Steve Hogg replies:
Where does her cleat position place her foot relative to the pedal axle?
Assuming that she doesn't have a Morton's foot or other issues relating to
foot morphology, I would suggest moving the cleats rearwards so that the centre
of the ball of her foot is in front of the centre of the pedal axle as viewed
from the side with crank arm horizontal and forward and foot level. If the
cleats are too far forward on the shoes, then the plantar fascia can be stressed
a lot. This can cause compaction of the metatarsal heads and nerve compression
and numbness or pain can result.
Another possible reason is that the shoes may not be wide enough for her
in the forefoot and the metatarsal heads may be laterally compressed for the
same result. A wider brand of shoe might help if a change in cleat position
does not.
Lastly, have a podiatrist check out your wife's feet because if the shoes
fit okay and cleat position is reasonable, the solution may be as simple as
using a metatarsal dome or similar underneath her shoe insoles.
Heel problems
I'm having some tightness on the outer edge of each foot that reaches more
or less the full length... from the small toe to the heel. Its worse on my left
foot, and the right is starting to feel similar, although some tightness is
going up the achilles tendon on it now too. On trying to stretch it out, it
feels quite painful and when massaging it with my hands it feels like I'm pulling
tendons by hand which is quite painful.
I've been using a some Northwave Aerator shoes with Specialized BG footbeds
in them, the blue ones. Today I was experimenting with the foot wedges that
come with them to try and see if that helped, but the valgus wedge on the right
seemed to make it worse.
I normally actually don't notice it on the bike unless I try to stretch out
the calves by dropping the heel, bringing the foot forward and pushing it up
using the other leg to help push the stretch. It's all a bit frustrating as
I'm not sure exactly how to go about getting this diagnosed.... and it's time
consuming making a small change then seeing if that has any effect at all.
Is there anything in particular I can do to try and track this down?
Marty Henderson
Steve Hogg replies:
Generally speaking (and I say this with some caution because there are exceptions)
the area that is loaded as you describe is the area that should be wedged
towards. This happens because you are autonomically trying to correct your
footplant on pedal. By using a valgus wedge which lifts the outside edge of
the foot as you have, you have made the problem worse because you have more
than likely wedged in the wrong direction. Reverse your wedges so that they
lift the inside edge of the foot. That should solve your problem (assuming
of course that wedging or the lack of, is the problem).
If you run into trouble, let me know.
Piriformis Syndrome and cycling
I'm a relatively fit 49 year old - I've been cycling my whole life but I've
given myself a weird injury and I'm not sure what to do. While climbing out
of the saddle I apparently pulled my piriformis muscle, with the result that
I have a persistent case of sciatica in my right leg only. NSAID medication
helps the symptoms and I'm resting a lot.
It's been about four months now and I'm definitely feeling better but I'm worried
about getting back on the bike because I have no idea what caused this. We have
a very good sports medicine clinic here in Sacramento that offers bike fit sessions,
with physiologists who specialize in cycling. Is it worth it for me to get a
new 'fit' when I can get back on the bike?
David Mathews
Sacramento, CA, USA
Scott Saifer replies:
It's definitely worth your while to have your fit checked by someone who
knows anatomy and biomechanics as well as bikes any time you have an injury
that may have arisen from a bike fit problem, but I'm doubtful in your case
that the problem started from an improper bike fit. You noted the problem
started while you were standing, which means that saddle position would not
have much to do with it unless the muscle was fatigued when you sitting and
finally pulled when you stood up.
If you've got a pulled muscle that still hurts after four months, I'd suggest
working with a physical therapist to get you fully functional again. At this
point, whatever pull you did is healed or is not going to heal quickly on
it's own. The appropriate stretching and strengthening routines would help
regain function.
Shims
What a wonderful service you provide on this Q&A. Your replies are really thorough
and helpful. I specialise in sports medicine but certainly am no expert on bike
fit. I am just now working with an elite junior cyclist who is struggling with
PFJ pain. Her knees often hit the cross bar and I think she might benefit from
medial shims. Her cleats are already set to bring her heels in. I have also
suggested trying a shorter crank. Am I on the right track here and if so where
do we get shims in Western Australia?
Peter Nathan
Steve Hogg replies:
From what you've said I can't tell you whether you're on the right track
with your athlete or not. Generally knee pain on the bike only has four general
causes:
1. Poor bike position.
2. Hip lower back issues that cascade towards the periphery.
3. Foot/ankle issues that cause the plane of movement of the knee to be challenged.
4. Any combination of above.
I'm not crazy about what you say about her cleat angle being set to bring
her heels in. Ideally her cleat angle should be set to allow her feet to sit
where they want to on the pedal while pedaling under load and allowing a margin
for error (freeplay) either side of that. Any other course of action increases
the risk of loading the knees more, not less.
Medial wedges (shims lift the foot, wedges cant the foot) will probably make
a difference on one or both sides as from what I can see, about 90% of riders
benefit from wedging with the huge majority of those needing medial wedging.
Have a look at this link - http://www.bikefit.com/products.php and get hold
of a FFMD. They can be a valuable guide to nailing down the number of wedges
best suited to the rider.
|